Note: Do not unplug cable when Reset Phone or waiting for Reset Phone is in the process. ▷10- Unplug USB cable, when Finish Download appears. Turn off your Android phone or feature phone. In the flash tool, click on Load Packet (settings icon) and locate the firmware either in PAC or P5C format. Extract the SPD tool folder and open UpgradeDownload.exe. ▷8- Click on Select Port and choose the port. Copy the firmware file to PC and remember the location. ▷7- Switch off the device and connect it to PC by pressing Volume up & down key. ▷6- Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xmlĪ- rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.ī- rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address. ▷5- As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM. ▷4- Click on Browse under the Programmer path to select MBN File. ▷2- Make sure your device has the Power to support flashing. ▷4- If it makes Qualcomm port, then driver has been successfully installed. ▷3- While connecting to PC, phone should be switched off and press volume up & down as boot key. ▷2- After installation, connect Phone to PC using USB cable.
Spd service tool v1.0.0 install#
QUALCOMM CPU Flashing is carried out in two phases:- ▶1: Driver Installation: ▷1- Download and install Qualcomm driver. While installing driver avoid using cable for successful installation. How To Flash a Qualcomm Based Phone or Tablet ▷12: Close sp flash tool on your computer and unplug phone ▷11: Now flashing is completed, a green ring will appear in sp flash tool ▷10: Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable) ▷9: After locating the scatter tab, click on the download button ▷8: In download tab, click on scatter load button ▷7: When sp flash tool open, go to download button in sp flash tool ▷5: switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket ▷4: Your phone must have 50 % charging before this process ▷3: Then download Firmware file/Flash file/Rom for your phone
Spd service tool v1.0.0 drivers#
▷2: Download and install MTK android USB drivers
0 kommentar(er)
